Pre-Register Online for the JConcepts Rage!

Due to the large amount of interest generated for this event please register ahead of time to secure your position today.

Click here to Pre-Register for the R/C Monster Motorsports Race Event at JConcepts Rage

Pit space inside the Carolina’s R/C building will be limited due to the size of the program. Pit space inside will be used on first come first serve basis. Plenty of room is available outside the building for tents, tables and trailers. Please be prepared to pit outside by bringing the proper pit space equipment.

The monster truck course has been the subject of many questions. Lipo batteries will be allowed with the rules for each class of competition listed below. Please see the below image of the proposed monster truck and scale-off track layout.

Note that the brown area = carpet racing line, green area = infield / freestyle area and the gray = scale-off area.

Please be advised this is subject to change without notice. We have also revealed one of the obstacles for the freestyle program to be a race used Firestone Terra tire, but there are more to come. Stay tuned!

Rule Updates

4wd Pro Modified – Brushed Solid Axle

• Tamiya Clodbuster, Super Clodbuster, Juggernaut 1 & 2, TXT-1, or any custom built 4wd electric truck with solid differential axles will run in one class unless otherwise specified by an RC Monster Motorsports official.

• Trucks must run 2 brushed type motors. (No brushless motors) allowed.

• Tires shall be any tire no smaller than: 5” x 3.5” wide. Any rubber Tread Type is permitted. Custom cut rubber tread designs will be allowed.

• 14 cell for NiMH cells or a maximum nominal voltage of 14.80v may be used for a Lipo.

4wd Pro Modified – Brushless Solid Axle

• Tamiya Clodbuster, Super Clodbuster, Juggernaut 1 & 2, TXT-1, Kyosho Twin Force or any custom built 4wd electric truck with solid differential axles will run in one class unless otherwise specified by an RC Monster Motorsports official.

• Trucks must run 1 or 2 brushless type motors.

• Tires shall be any tire no smaller than: 5” x 3” wide. Any rubber Tread Type is permitted. Custom cut rubber tread designs will be allowed.

• 14 cell for NiMH cells or a maximum nominal voltage of 14.80v may be used for a Lipo.

Pro Modified 2.2” – Open Solid Axle

• Axial Scorpion, Losi Comp Crawler, Venom Creeper or any other production or custom built 4wd Electric Monster Truck with solid axle suspension similar to the production trucks stated above run in this class.

• Trucks must run 1 brushless or brushed type motors.

• 2.2” bead mounting diameter based tires no smaller than 4.4” x 2” wide with any rubber tread type is permitted. Custom cut rubber tread designs will be allowed.

• 6 cell for NiMH cells or a maximum nominal voltage of 7.4v may be used for a Lipo comprised of a single 2 cell 7.4v Lipo pack.

4wd Pro Modified – Open Independent

• Traxxas E-Maxx, Traxxas E-Revo and Hotbodies E-Zilla or any other production or custom built 4wd Electric Monster Truck with independent type suspension similar to the production trucks stated above run in this class.

• Trucks must run 1 or 2 brushless type motors.

• Tires shall be any tire no smaller than: 5” x 3” wide. Any rubber Tread Type is permitted. Custom cut rubber tread designs will be allowed.

• 14 cell for NiMH cells or a maximum nominal voltage of 14.80v may be used for a Lipo.

Return to Race News | Return to Main Home Page

Recommend this Article to a Friend